Our services

We present you all the services that we carry out in Villarrobledo Depots. If you need anything, do not hesitate to contact us.

Our values

Quality of work

We focus on offering the best possible quality.

Excellent treatment

We have been treating each client individually.

Qualified staff

All of our staff are prepared for their work.

Do you need a budget?

Manufacture of pressure vessels

Pressure vessels are watertight vessels designed to contain gases or liquids at pressure levels above ambient pressure. They are tanks that require extensive engineering knowledge for their design, development and subsequent installation.

Some of the most frequent uses that are applied in this type of tanks are steam boilers, tanks for storing gases, storage of liquefied gases, storage of fuels, chemical products, etc.

The aforementioned pressure difference requires great care in the design, manufacture and installation of this type of tank. This is why, at Depósitos Villarrobledo, we manufacture pressure tanks following the most demanding engineering standards. We comply with all applicable regulations regarding design, quality and safety.

Our pressure vessel manufacturing technicians are certified and have extensive experience. They form a multidisciplinary team that tries to cover all stages, from the initial idea to the final delivery to the client.

Funds of tanks and cisterns

We manufacture tank and tank bottoms of the Korbbogen, Klopper, low pressure, flat bottom, conical and elliptical models. Consult appropriate dimensions for your jobs.

We use various materials and alloys: Carbon Steels (S235JR, S275JR, S355 and A516), Stainless Steels (AISI 304, 316L and duplex) in their various finishes, Aluminum (5000 and 7000 series), any material consult. Bench welds. Backgrounds can be polished to any finish. It can be beveled to interior and exterior backgrounds.

We produce boiler bottom figures according to standards: Klopper (DIN 28011 M, UNE 9201), Korbbogen (DIN 28013), ASME, flat profile with round and square flange, conical profile, inverted. Bottom diameters range from 750 to 6000 mm. and initial thicknesses of up to 25 mm. in iron and 15mm. in stainless steel. in stainless steel, although special dimensions can be studied.

Likewise, we carry out all kinds of semiautomatic bench welding, initial disc cuts and concentric perforations on the different figures of finished bottoms.

Perforated Sheets (Grip and Non-Slip)

Perforated grip and slip resistant plates are made by a process of punching into sheet metal, usually steel or aluminium. This process involves drilling holes of a specific size and shape into the surface of the sheet, thus creating a raised texture that helps improve slip resistance.

The advantages of grip and anti-slip perforated sheets are as follows:

Safety: The raised texture of the perforated plates provides increased traction, reducing the risk of slips and falls on wet or oily surfaces.

Durability: Perforated sheets are made of high-strength metal, making them resistant to wear and corrosion.

Versatility: Perforated sheets can be manufactured in a wide variety of shapes and sizes, making them suitable for a wide range of applications.

Attractive Appearance: Perforated sheets can be designed in different patterns and designs, giving them an attractive and distinctive appearance.

Easy to install: Perforated sheets are easy to install and do not require specialized tools for assembly.

In summary, Perforated Anti-Slip Grip Sheets are an excellent choice for applications that require a non-slip and wear resistant surface such as stairs, walkways, platforms and ramps.

Numerical Control Folding

CNC bending is a technique that allows us to bend metal sheets, being able to carry out repetition of work with precision and with the reduction of possible errors. Since our technologies allow us to visualize, before the elaboration of the product, the final result thanks to the use of 3D CAD.

With this preview and forecast of what the final result will be like, we manage to reduce costs and advance the production procedure, since it is not necessary to carry out a testing phase. Therefore, we manage to reduce the necessary investment in the manufacture of the piece, offering a final product that meets all the guarantees and requirements.

Carrying out the CNC bending implies exerting pressure on the flat metal plate, a fact that results in the different angles at which we can make the bending.

Keep in mind that depending on the angle required for folding, it is necessary to exert more or less pressure. And it is based on this, that the sheet may or may not suffer wear, as well as stresses that act on the inner and outer face of the folded sheet. The pressure exerted will permanently deform the outer part of the sheet, while the inner part will return to its initial shape.

Road Signs

The company specializes in the manufacture and modeling of all types of vertical signage traffic signs and currently has advanced equipment and technology to develop this process in various materials such as galvanized steel, stainless steel and aluminum.

Manufacture of kilometer milestones, clamps and all kinds of road marking accessories.

It also offers a line of economic signals to cover all the needs and characteristics of each client.

Fiber Laser (4000×2000 table)

The fiber laser has already become an essential in the cutting sector. It is a type of solid state laser used by pioneering machining companies to cut metal with high precision, speed, respect for the environment and energy savings. This type of laser is more cost-effective than CO2 (and does not emit gases), and produces a very smooth cut, suitable for any metal.

In the fiber laser the amplifying medium of the light beam is an optical fiber doped with rare earths such as erbium, neodymium, ytterbium, diprosium, holmium, praseodymium and thulium. One or more laser diodes are used for pumping, so most fiber lasers are pumped diode lasers.

Numerical Control Plasma

Plasma cutting is a high-speed, highly accurate way of cutting metal (aluminum, nickel alloys, copper, titanium, steel and stainless steel) that is typically a low cost operation, becoming increasingly popular within of industries that want to reduce outsourcing of metal profiles.

The addition of CNC to plasma cutting gives machines greater flexibility to cut a wide range of shapes. A detailed set of instructions entered into the machines’ numerical control means that the days of manual cutting guidance are over.

Last proyects

Contact Us

11 + 12 =

Polígono Industrial C/Leonardo da Vinci, 25 - Villarrobledo

(+34) 967 14 36 92 / (+34) 628 71 05 32